|
|
Technology to remove nitrogen oxides (NOx) from flue gases for large combustion plants
Kučera, Jan ; Brummer, Vladimír (referee) ; Jecha, David (advisor)
This diploma thesis deals with selected abatement techniques of nitrogen oxides (NOx) developed for large combustion plants. The first part describes selected NOx, their properties and explains the formation during combustion. Furthermore, there is an analysis of current legal legislation regulating the issue of emission limits. The third part presents selected primary and secondary measures that are widely used. The emphasis is placed on the description of selective catalytic (SCR) and non-catalytic reduction (SNCR). Finally, the basic design of these technologies for model combustion equipment is performed. The consumption of reducing medium and the volume of the catalyst for the mentioned techniques are calculated here. The estimate of selected operating and investment costs is a part of the basic scheme.
|
|
|
Unit for utilization of contaminated biomass for energy production
Votava, Jakub ; Broukal, Jakub (referee) ; Kropáč, Jiří (advisor)
The purpose of the thesis is to create preliminary design calculations to determine dimensions, weights and pressure losses of individual contaminated biomass combustion gas treatment nodes. The first part of the thesis deals with the definition of biomass as a fuel, legislative determination of allowed emissions and their description. Then the systems for combustion gas treatments are discussed given their brief description. The practical part focuses on shape designs, determining base dimensions of each type. Weights and pressure losses of individual versions are computed too. In the last part the individual versions are solved with real values and compared to each other.
|
|
|
Recovery of Energy from Municipal Wastes
Šíma, Kamil ; Bébar, Ladislav (referee) ; Jícha, Jaroslav (advisor)
The topic of the diplome thesis is draft of the waste-to-energy plant for municipal waste with cogeneration of heat. Basic specification of project: Waste-to-Energy plant is facilitated by two rotary kilns of type operating in parallel. Further flue gas leaving the post-combustor enters a multicyclone unit to separate substatial portion of fly-ash. Heat of flue gas at the temperature of 1000°C generates superheated steam in a Heat Recovery Steam Generator (HRSG). Dry sorption process is appllied for flue gas treatment. Specifically sodium bi-carbonate is used for it. Products of reactions and remnants of dust are separated by a baghouse. Superheated steam, generated by two HRSG, presents the inlet stream of a condensing steam turbine with steam extraction. The diploma thesis contains calculation of major devices and basic economical and financial statement of project.
|
|
|
Modern methods of wet cleaning flue-gas
Kubíček, Jan ; Grolig, Ondřej (referee) ; Dvořák, Radek (advisor)
The main theme of this master’s thesis is to acquaint with flue gas cleaning problems. Also modernization of experimental device called “O-element”, installed in laboratory at Institute of process and environmental engineering, is involved in this master’s thesis. “Oelement is used for cleaning acid elements from flue gas. Further there are results of experimental measuring on this device, and their estimation.
|
|
|
Design of technology unit for removal of persistent pollutans for thermal processing of contaminated biomass
Plch, Michal ; Máša, Vítězslav (referee) ; Pařízek, Tomáš (advisor)
The Diploma’s work deals with design to use new methods of cleaning the combustion products for the incinerator of biomass, which guarantees removal of dioxins from the combustion products. Thesis depicts methods of cleaning the combustion products, like ADIOX, using ceramic filters, catalytically filters and methods REMEDIA. Thesis compares constituent methods in terms of effectiveness and according to economic analysis applicable to incinerator of biomass-power output 1 MW. Thesis acquaints with the conception of biomass and with thermic processing, which produces dioxins. Thesis processes using biomass in Czech Republic and plan for using in the future. Thesis processes detailed model of filter using the fabric filters REMEDIA. Suggestion of position of the filter and it is connection to original products line of cleaning the combustion products. Increased pressure loss of the new pipework way and increased consumption of ventilator incinerator is calculated for the new connection. In quest of decreasing the thermal loss of combustion products and in quest of increasing safety of operation is calculated and in quest of increasing safety of operation is calculated proposal of isolation for the filter and pipework. In the end of the thesis is depicted using the technology for decreased amount of dioxins from the fly ash from dioxin filter.
|
|
|
Simulation of technologies for thermal treatment of waste
Venhoda, Tomáš ; Kropáč, Jiří (referee) ; Pavlas, Martin (advisor)
This thesis mainly deals with the thermal treatment of waste - hazardous waste incineration and energy recovery municipal waste incinerators - their descriptions and analysis of legislative conditions. The flue gas cleaning system energy production in different operating modes is assessed by energy and mass balances. Computational models are developed for this purpose. On this basis, productions of energy from thermal treatment of hazardous and communal waste were compared.
|
|
|
Waste heat recovery vith steam turbine
Korytár, Zbyněk ; Vlček, Lukáš (referee) ; Fiedler, Jan (advisor)
The aim of this thesis is the design of municipal waste incinerator using the generated steam for power generation and distribution of heat. At the beginning is engaged in development of waste issues and the current state of waste management. The next section describes the options of waste treatment and possible solutions to the current state of waste issues. The concept of waste incineration plants: For waste incineration is used line for burning 100,000 tons of municipal waste per year.Combustion takes place in a grate boiler. Its advantage is the versatility and flexibility to waste. Electricity generation is dealt with condensing turbine with controlled consumption. The flue gas cleaning is designed to semi-wet method. The final stage involves the calculation of the balance, the calculation of electric energyand basic economic evaluation.
|
|
|
Distribution of heavy metals in waste incinerator
Poláková, Annamária ; Brummer, Vladimír (referee) ; Jecha, David (advisor)
The main scope of thesis is to describe the pollutant removal techniques with a focus on heavy metals. With that relate chapters describing the formation of pollutants and their effect on human health. The thesis focuses on a detailed description of flue gas cleaning technology and its evaluation. Evaluation is shown in tables comparing emission measurement on waste incineration plant SAKO Brno, a.s. with emission limits. The thesis also briefly describes other options for municipal waste management.
|
|
|
Advanced Computational Tool for Flue Gas Cleaning System Design in Thermal Processing of Waste
Kropáč, Jiří ; Klemeš,, Jiří (referee) ; Ucekaj, Vladimír (referee) ; Bébar, Ladislav (advisor)
The thesis describes the development of a computational tool that allows sophisticated analysis and design of flue gas cleaning technologies for thermal treatment of waste. The assessment of a technological composition of the process in terms of energy consumption, temperature of the flue gas stream and ensuring the fulfilment of emission limits allows estimating the influence of flue gas cleaning system on parameters of an up-to-date waste incinerator. The work is based on an already created computational system. Its output will be integrated into a software system with a user-friendly interface. Creation of the computational system is based on the performed research in the given area. The work presents sets of operational values and relationships describing current technologies used to reduce harmful emissions in the flue gas from thermal treatment of waste.
|
|
|
Reduction of nitrogen oxides from the flue gas stream on catalysts under non-standard conditions
Minář, Marek ; Brummer, Vladimír (referee) ; Jecha, David (advisor)
The objective of the presented diploma thesis is reduction of nitrogen oxides from the flue gas stream on catalyst under non-standart conditions. Emphasis is places on the description of selected pollutants in flue gas (especially nitrogen oxides), legislative requirements for air protection and technologies for removal of nitrogen oxides, expecially methods of selective catalytic and non-catalytic reduction. The practical part is devoted to the reduction of nitrogen oxides by selective catalytic reduction on a pilot plant INTEQ II in the laboratory NETME Center. The subject of interest is the determination of the NOx reduction efficiency depend on the temperature for selected catalyst. The end of the practical part pursues with comparison of measurement results and their evaluation.
|
guest ::
